Plumbing Equipments /
131.18 KMPH STEEL MAGNETIC AIR&DIRT SEPARATOR
KMPH Steel Magnetic Air & Dirt Separator
SPECIFICATIONS / USAGE AREAS
• Since the cleaning and maintenance of the classical type of dirt separators cannot be made easily by the user, they generally become out of function by time. With the help of ball valve on the bottom of the Steel Magnetic Dirt Separator, cleaning can be done very easily.
• Specially designed stainless steel mesh filters are present.
• Percentage of glycol in the heating system is maximum 50%
• Accumulated impurity volume is much bigger according to classical dirt separators.
Needed periodic cleaning is much more less.
• The water flow rate is low at the bottom where the super strong magnet is located.
Therefore, it can catch even the smallest parts.
• When the discharge valve is opened, the magnet is removed and accumulated parts under the body are taken out. In order for the magnet to be removed easily, the Steel Magnetic Dirt Seperator must be mounted at least 30 cm above the ground.
Features
Maximum Operating Temperature
110 °C
Maximum Operating Pressure
1000 kPa (10 bar)
Connection Sizes / Pressure Class
Flanged Connection: DN50-DN150 / PN16
Welded Connection: 60,3 mm-168,3 mm
(Please contact for products between DN200- DN250)
Filter Material
Stainless steel
Outer Surface Protection Paint
Electrostatic Powder Paint
Manufactured in accordance with 2014/68/EU Pressure Equipment Directive and EN 13445-3 Standards.
Flanged Steel Magnetic Air & Dirt Separator
Code | 131.18.16.1 | 131.18.17.1 | 131.18.18.1 | 131.18.19.1 | 131.18.20.1 | 131.18.21.1 | |
A | mm | DN50 | DN65 | DN80 | DN100 | DN125 | DN150 |
2” | 2½” | 3” | 4” | 5” | 6” | ||
B | mm | 420 | 420 | 500 | 504 | 635 | 635 |
C* | mm | Special Thread | Special Thread | Special Thread | Special Thread | Special Thread | Special Thread |
D | mm | 268 | 268 | 293 | 293 | 403 | 403 |
E | mm | 578 | 578 | 683 | 683 | 903 | 903 |
F | mm | 1″ | 1″ | 1″ | 1″ | 1″ | 1″ |
Weight | kg | 13 | 14 | 22 | 25 | 46 | 47 |
Volume | lt | 9 | 9 | 18 | 18 | 57 | 57 |
Kv | m3/h | 75 | 150 | 180 | 280 | 450 | 720 |
Min.-Max. Flow rate | m3/h | 8-12 | 10-22 | 18-30 | 28-48 | 45-71 | 67-105 |
*: Connection C has special design with Ø50 whitworth thread.
Kv = Q / √ΔP… Q = Water flow rate (m³ / h)
ΔP = Pressure loss on the product (bar)
Welded Steel Magnetic Air & Dirt Separator
Code | 131.18.16.2 | 131.18.17.2 | 131.18.18.2 | 131.18.19.2 | 131.18.20.2 | 131.18.21.2 | |
A | mm | DN50 | DN65 | DN80 | DN100 | DN125 | DN150 |
60,3 | 76,1 | 88,9 | 114,3 | 139,7 | 168,3 | ||
B | mm | 330 | 330 | 400 | 400 | 525 | 525 |
C* | mm | Special Thread | Special Thread | Special Thread | Special Thread | Special Thread | Special Thread |
D | mm | 268 | 268 | 293 | 293 | 403 | 403 |
E | mm | 578 | 578 | 683 | 683 | 903 | 903 |
F | mm | 1″ | 1″ | 1″ | 1″ | 1″ | 1″ |
Weight | kg | 8 | 8 | 11 | 12 | 24 | 24 |
Volume | lt | 9 | 9 | 18 | 18 | 57 | 57 |
Kv | m3/h | 75 | 150 | 180 | 280 | 450 | 720 |
Min.-Max. Flow rate | m3/h | 8-12 | 10-22 | 18-30 | 28-48 | 45-71 | 67-105 |
*: Connection C has special design with Ø50 whitworth thread.
Kv = Q / √ΔP… Q = Water flow rate (m³ / h)
ΔP = Pressure loss on the product (bar)
KODSAN reserves the right to change the product specifications, technical information and installation diagrams without any notifications.
All information written on this page can not be copied or used without permission of KODSAN. Kodsan can not be held responsible if any of the technical information and schemes are considered exemplary by third parties.