Water Heaters & Storage Tanks /
11.13.2 KBD DOUBLE COIL WATER HEATER 800-3000
Features
Volume
800 lt-3000 lt
Heat Exchanger Maximum Heating Power (Upper HE / Lower HE)
141 kWh / 272 kWh
Maximum Solar Collector Area
: 131 m2
Heat Exchanger Maximum Operating Temperature
110˚C
Heat Exchanger Maximum Operating Pressure
10 Bar
Domestic Hot Water Maximum Operating Temperature
95˚C
Domestic Hot Water Maximum Operating Pressure
10 Bar
Inner Surface Coating
Tank inner surface is enamelled (glass-lined) in accordance with DIN 4753-3 standard.
Manufactured in accordance with 2014/68/EU Pressure Equipment Directive, TS EN 13445-3, TS736 and TS EN 12897 Standards.
Insulation and Equipments
| 11.13.2 PRO Double Coil Water Heater | 800L-1000L | 1500L-2000L | 2500L-3000L | |
| Insulation | x | x | x | |
| OPS/80 mm | OPS/80 mm | OPS/80 mm | ||
| OPS/80 mm | OPS/80 mm | OPS/80 mm | ||
| STD/80 mm | STD/100 mm | STD/100 mm | ||
| Coating | Blueshell- Recyclable polyethylene cover that provides heat-saving | x | x | x |
| Vinleks- Artificial Leather | x | x | x | |
| OPS | OPS | OPS | ||
| Equipment | STD/Ø100 | STD/Ø100 | STD/Ø100 | |
| Sensor Tube | ||||
| Cleaning & Control Flange | STD/Ø400 mm | STD/Ø400 mm | STD/Ø400 mm | |
| Electric Heater | OPS/2″ | OPS/2″ | OPS/2″ | |
| Cathodic Protection | Magnesium Anode | STD | STD | STD |
| Electronic Anode | OPS | OPS | OPS | |
| Carrier Element | Steel leg system mounted on a palette from 3 different locations | STD | STD-x | x |
| Circle steel leg system that provides circular floor contact | x | x-STD | STD | |
STD: Abbreviation for spare parts and equipments which belong to the standard products.
OPS: Abbreviation for the optional spare parts and equipments for non-standart products
Technical Data
| Description | Code | Unit | 11.13.20 | 11.13.21 | 11.13.22 | 11.13.23 | 11.13.24 | 11.13.25 |
| Capacity | V | lt | 800 | 1000 | 1500 | 2000 | 2500 | 3000 |
| Insulation Type & Thickness | i | mm | IZOMAX/ 80 | IZOMAX/ 80 | IZOMAX/ 100 | IZOMAX/ 100 | IZOMAX/ 100 | IZOMAX/ 100 |
| Diameter | ØD | mm | 910 | 1010 | 1160 | 1350 | 1500 | 1500 |
| Height | H | mm | 2110 | 2070 | 2375 | 2280 | 2160 | 2580 |
| Cleaning & Control Flange Diameter | N1 | inch | Ø400 | Ø400 | Ø400 | Ø400 | Ø400 | Ø400 |
| Electric Heater Connection | N2 | inch | 2″ | 2″ | 2″ | 2″ | 2″ | 2″ |
| Thermometer / Sensor Tube Connections | N3 | inch/mm | ½” | ½” | ½” | ½” | ½” | ½” |
| Domestic Cold Water Inlet Connection | N4 | inch | 1½” | 1½” | ||||
| Lower Heat Exchanger (Serpentine) Inlet/Outlet Connections | N5-N6 | inch | 1½” | 1½” | ||||
| Upper Heat Exchanger (Serpentine) Inlet/Outlet Connections | N7-N9 | inch | 1½” | 1½” | ||||
| Circulation Return Connection | N8 | inch | 1½” | 1½” | ||||
| Domestic Hot Water Outlet Connection | N10 | inch | 1½” | 1½” | ||||
| Magnesium Anode Connection | N11 | inch | ||||||
| Blind Connection | N12 | inch | 2″ | 2″ | 2″ | 2″ | ||
| Lower Heat Exchanger (Coil) Surface Area | A | 2,85 | 2,85 | 3,49 | 4,50 | 5,78 | 6,57 | |
| Upper Heat Exchanger (Coil) Surface Area | A | 1,46 | 1,46 | 1,46 | 2,21 | 2,62 | 3,02 | |
| Gross Weight | G | kg | 300 | 325 | 416 | 539 | 749 | 823 |
| Tilt Height | R | mm | 2300 | 2305 | 2650 | 2655 | 2635 | 2990 |
The table shown above is prepared based on spare parts and equipments which belong to the standard products; all products have internal thread connection.
KODSAN reserves the right to change the product specifications, technical information and installation diagrams without any notifications.
All information written on this page can not be copied or used without permission of KODSAN. Kodsan can not be held responsible if any of the technical information and
schemes are considered exemplary by third parties.