Water Heaters & Storage Tanks /
101.12 KCB-S SINGLE COIL COMBI BUFFER TANK
Features
Volume
500 lt/100 lt -2000 lt/350 lt
Domestic Hot Water & Buffer Tank Maximum Operating Temperature
95°C
Domestic Hot Water / Buffer Tank Maximum Operating Pressure
DHW (Inner Tank): 6 bar / Buffer (Outer) Tank: 3 bar
Inner Surface Coating
Inner surface of inner tank is enamelled (glass-lined) in accordance with DIN 4753-3 standard.
Manufactured in accordance with 2014/68/EU Pressure Equipment Directive, TS EN 13445-3 and TS EN 12897 Standards.
Insulation and Equipments
| Description | Code | Unit | 101.12 18.1 |
101.12 18.2 |
101.12 20.2 |
101.12 21.2 |
101.12 21.3 |
101.12 22.3 |
101.12 22.4 |
101.12 23.3 |
101.12 23.4 |
| Capacity | V | lt | 500/100 | 500/160 | 800/160 | 1000/160 | 1000/200 | 1500/200 | 1500/350 | 2000/200 | 2000/350 |
| Insulation Type & Thickness | i | mm | PU/50 | PU/50 | SPU/80 | SPU/80 | SPU/80 | SPU/80 | SPU/80 | SPU/80 | SPU/80 |
| Diameter | ØD | mm | 740 | 740 | 910 | 1010 | 1010 | 1120 | 1120 | 1310 | 1260 |
| Height | H | mm | 1845 | 1845 | 2110 | 2070 | 2070 | 2375 | 375 | 2280 | 2280 |
| Primary/Secondary Energy Inlet/Outlet Connections | N1 | inch | 1½” | 1½” | 1½” | 1½” | |||||
| Electric Heater Connection | N2 | inch | 1½” | 1½” | 2″ | 2″ | 2″ | 2″ | 2″ | 2″ | 2″ |
| Thermometer / Sensor Tube Connections | N3 | inch | ½” | ½” | ½” | ½” | ½” | ½” | ½” | ½” | ½” |
| Drain Connection | N4 | inch | 1½” | 1½” | 1½” | 1½” | |||||
| Heat Exchanger (Coil) Inlet/Outlet Connections | N5-N6 | inch | |||||||||
| Domestic Cold Water Inlet Connection | N7 | inch | 1″ | 1″ | 1″ | ||||||
| Domestic Hot Water Outlet Connection | N8 | inch | 1″ | 1″ | 1″ | ||||||
| Inner Tank Air Ventilation Connection | N9 | inch | ½” | ½” | ½” | ½” | ½” | ½” | ½” | ½” | ½” |
| Outer Tank Air Ventilation Connection | N10 | inch | ½” | ½” | ½” | ½” | ½” | ½” | ½” | ½” | ½” |
| Magnesium Anode Connection | N11 | inch | |||||||||
| Blind Connection | N12 | inch | |||||||||
| Heat Exchanger (Coil) Surface Area | A | 1,98 | 1,98 | 2,85 | 2,85 | 2,85 | 3,49 | 3,49 | 4,50 | 4,50 | |
| Gross Weight | G | kg | 176 | 190 | 290 | 305 | 317 | 415 | 427 | 510 | 522 |
| Tilt Height | R | mm | 1990 | 1990 | 2300 | 2305 | 2305 | 2625 | 2625 | 2630 | 2605 |
STD: Abbreviation for spare parts and equipments which belong to the standard products.
OPS: Abbreviation for the optional spare parts and equipments for non-standart products.
Technical Data
| 101.12 Single Coil Combi Buffer Tank | 500L/ 100L-160L |
800L-1000L/ 160L-200L |
1500L/ 200L-350L |
2000L/ 200L-350L |
|
| Insulation | STD/50 mm | x | x | x | |
| x | STD/80 mm | STD/80 mm | STD/80 mm | ||
| x | OPS/80 mm | OPS/80 mm | OPS/80 mm | ||
| x | x | x | x | ||
| Coating | Blueshell- Recyclable polyethylene cover that provides heat-saving | STD | x | x | x |
| Vinleks- Artificial Leather | x | STD | STD | STD | |
| x | OPS | OPS | OPS | ||
| Equipment | OPS/Ø63 | OPS/Ø100 | OPS/Ø100 | OPS/Ø100 | |
| Sensor Tube | OPS/½” 4 pieces |
||||
| Cleaning & Control Flange | STD/Ø100 mm | STD/Ø125 mm | STD/Ø125 mm | STD/Ø125 mm | |
| Electric Heater | OPS/1½” | OPS/2″ | OPS/2″ | OPS/2″ | |
| Cathodic Protection | Magnesium Anode | STD | STD | STD | STD |
| Electronic Anode | OPS | OPS | OPS | OPS | |
| Carrier Element | Steel leg system mounted on a palette from 3 different locations | STD | STD | STD | x |
| Circle steel leg system that provides circular floor contact | x | x | x | STD | |
The table shown above is prepared based on spare parts and equipments which belong to the standard products; all products have internal thread connection.
KODSAN reserves the right to change the product specifications, technical information and installation diagrams without any notifications.
All information written on this page can not be copied or used without permission of KODSAN. Kodsan can not be held responsible if any of the technical information and
schemes are considered exemplary by third parties.