Solar Thermal Systems /
11.21 KSC HORIZONTAL DOUBLE WALL WATER HEATER
Heat Exchanger (Double Wall) Maximum Operating Temperature
Heat Exchanger (Double Wall) Maximum Operating Pressure
Domestic Hot Water Maximum Operating Temperature
Domestic Hot Water Maximum Operating Pressure
Inner Surface Coating
Tank inner surface is enameled (glass-lined) in accordance with DIN 4753-3 Standard.
Manufactured in accordance with 2014/68 EU Pressure Equipment Directive, TS EN 13445-3, TS 736 and TS EN 12897 Standards.
Insulation and Equipments
|11.21 Horizontal Double Wall Water Heater||150L-300L|
|Insulation||42kg/m3 HCFC-free polyurethane in accordance with the 814/2013 EU ErP Comission Regulations and EN 15332 Standard (PU)||STD/50 mm|
|Coating||Electrostatic Powder Painted Sheet||STD|
|Equipment||Cleaning & Control Flange||STD/Ø80 mm|
|Pressure & Air Ventilating Connection||STD|
|Cathodic Protection||Magnesium Anode||STD|
STD: Abbreviation for spare parts and equipments which belong to the standard products.
OPS: Abbreviation for the optional spare parts and equipments for non-standard products.
|Insulation Type & Thickness||i||mm||PU/50||PU/50||PU/50|
|Heating Fluid Outlet (Collector Inlet) Connection*||N1||inch||¾”||¾”||¾”|
|Pressure & Air Ventilating Connection*||N2||inch||¾”||¾”||¾”|
|Domestic Cold Water Inlet Connection*||N3||inch||¾”||¾”||¾”|
|Domestic Hot Water Outlet Connection*||N4||inch||¾”||¾”||¾”|
|Heating Fluid Inlet (Collector Outlet) Connection*||N5||inch||¾”||¾”||¾”|
|Magnesium Anode Connection||N6||inch||1¼”||1¼”||1¼”|
|Cleaning & Control Flange Diameter /
Electric Heater Connection
The table shown above is prepared based on spare parts and equipments which belong to the standard products; Connections which are marked with “*” have external thread, while others have internal thread connection.
KODSAN reserves the right to change the product specifications, technical information and installation diagrams without any notifications.
All information written on this page can not be copied or used without permission of KODSAN. Kodsan can not be held responsible if any of the technical information and
schemes are considered exemplary by third parties.