101.14.2 KBT-S SINGLE COIL BUFFER TANK 500-3000 - Kodsan
Over 35 years of experience in manufacturing HVAC equipment
Water Heaters & Storage Tanks /

101.14.2 KBT-S SINGLE COIL BUFFER TANK 500-3000

Features

Volume
500 lt -3000 lt

Buffer Tank Maximum Operating Temperature
95°C

Buffer Tank Maximum Operating Pressure
6 Bar

Manufactured in accordance with 2014/68/EU Pressure Equipment Directive, TS EN 13445-3 and TS EN 12897 Standards.

Insulation and Equipments

101.14 Single Coil Buffer Tank 500L 800L-1000L 1500L-2000L 2500L-3000L
Insulation PU- 42kg/m3 HCFC-free polyurethane in accordance with the 814/2013 EU ErP Comission Regulations and TS EN 12897 Standards STD/50 mm x x x
Soft PU- 15 kg/m3 soft polyurethane x STD/80 mm STD/80 mm STD/80 mm
Soft PU- 26 kg/m3 flame retardant soft polyurethane x OPS/80 mm OPS/80 mm OPS/80 mm
Izomax- 50kg/m3 insulation with d0 fire class as well as with BL-S3 compatible with the ErP regulations following the 814/2013 EU Comission Regulations and TS EN 12897 Standards x OPS/80 mm OPS/80 mm OPS/80 mm
Coating Blueshell- Recyclable polyethylene cover that provides heat-saving STD x x x
Vinleks- Artificial Leather x STD STD STD
Izoqua- Waterproof PVC unit which is suitable for exterior usage. (Offered optionally with the izomax insulation application) x OPS OPS OPS
Equipment Thermometer (0°C- 120°C) OPS/Ø63 OPS/Ø100 OPS/Ø100 OPS/Ø100
Sensor Tube OPS/½”
3 pieces
OPS/½”
3 pieces
OPS/½”
3 pieces
OPS/½”
3 pieces
Cleaning & Control Flange x x x x
Electric Heater OPS/1½” OPS/2″ OPS/2″ OPS/2″
Air Ventilation Connection STD/1¼” STD/1¼” STD/1¼” STD/1¼”
Cathodic Protection Magnesium Anode x x x x
Electronic Anode x x x x
Carrier Element Steel leg system mounted on a palette from 3 different locations STD STD-x x x
Circle steel leg system that provides circular floor contact x x-STD STD STD

STD: Abbreviation for spare parts and equipments which belong to the standard products.
OPS: Abbreviation for the optional spare parts and equipments for non-standart products.

Technical Data

Description Code Unit 11.14.18 11.14.20 11.14.21 11.14.22 11.14.23 11.14.24 11.14.25
Capacity V lt 500 800 1000 1500 2000 2500 3000
Insulation Type & Thickness i mm SPU/80 SPU/80 SPU/80 SPU/80 SPU/80 SPU/80 SPU/80
Diameter ØD mm 740 910 1010 1120 1310 1460 1460
Height H mm 1845 2110 2070 2375 2280 2160 2580
Primary/Secondary Energy Inlet/Outlet Connections N1 inch 1¼” 1½” 1½” 1½” 1½” 2″ 2″
Electric Heater Connection N2 inch 1½” 2″ 2″ 2″ 2″ 2″ 2″
Thermometer & Sensor Tube Connections N3 inch/mm ½” ½” ½” ½” ½” ½” ½”
Drain Connection N4 inch 1¼” 1½” 1½” 1½” 1½” 2″ 2″
Heat Exchanger (Serpentine) Inlet/Outlet Connections N5-N6 inch 1¼” 1¼” 1¼” 1¼” 1¼” ½” ½”
Air Ventilation Connection N7 inch 1¼” 1¼” 1¼” 1¼” 1¼” 1¼” 1¼”
Blind Connection N8 inch 1¼” 1¼” 1¼” 2″ 2″ 2″ 2″
Heat Exchanger (Coil) Surface Area A m2 1,98 2,85 2,85 3,49 4,50 5,78 6,57
Gross Weight G kg 143 232 245 323 455 510 625
Tilt Height R mm 1990 2300 2305 2625 2630 2610 2965

* : The number of energy inlet/outlet connections is 4 for 100L-300 L products, 2 for the primary circuit, 2 for the secondary circuit; and 8 for 500L-5000L products, 4 for the primary circuit, and 4 for the secondary circuit.

The table shown above is prepared based on spare parts and equipments which belong to the standard products; all products have internal thread connection.

 

 

KODSAN reserves the right to change the product specifications, technical information and installation diagrams without any notifications.
All information written on this page can not be copied or used without permission of KODSAN. Kodsan can not be held responsible if any of the technical information and schemes are considered exemplary by third parties.

Contact Us!

Contact us to get ideas, start a project or just to meet.

Contact Us

Downloadable Catalogue

Download our catalogue to learn more about our company and capabilities.